Quick Release Over-Run Coupling

Designed for fitting to implement end Implement Safety Guard must cover coupling. Exclusive design features internal bearing.
Not to be fitted to tractor end as coupling may protrude past tractor PTO Guard.

SAFETY WARNING!

U.S. Safety Standard precludes the use of P.T.O. adaptors that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD.
Before fitting the quick-release over-run coupling you must confirm that the tractor involved is fitted with an ASAE or ISO approved tractor Master Power Take-off GUARD as supplied by the tractor manufacturer and that a guard extension has been fitted.

Full guard extension and Safety Instructions are attached to each accessory.
IMPLEMENT OVER-RUN (FREEWHEEL) COUPLINGS
THESE UNITS ARE NOT A SAFETY CLUTCH!

Over-run coupling prevents the tractor PTO and transmission from being driven by implements on the over-run ie. the inability to stop single clutch tractors such as the Ferguson Te20, TO20, MF35 single, Ford 8N, 9N, 2N when a Rotary Cutter is attached.
No protection under load hence normally used in conjunction with a separate clutch.
SEE COMBINED FREEWHEEL / SAFETY CLUTCHES

https://www.bare-co.com/files-pto2002-pto66

Check out our PTO Connect Adapter